Connect is the perfect dab vaporizer for glassware lovers! Moreover, the G Pen Connect Vaporizer is fully compatible with the Stundenglass Gravity Infuser a match made in heaven!
The design of the bong vape is a revolutionary alternative to conventional concentrate consumption. Within five seconds of activation it is ready to deliver high-density, quality vapor production without the worry of a torch and exposed nail.
G Pen Connect how to use?
Register your G Pen Connect S/N at bottom of the packing at Gpen.com/register.
Fully charge G Pen Connect Battery from the micro USB port located on the button side of battery housing.
The Button LED will shine red while charging, then LED turns green when the device is fully charged. Subsequently, when battery needs charging, the bottom led will blink red 8 times. If the battery reads a short circuit or improper tank connection, the button led will blink 3 times.
Twist G Pen Connect Tank into top of G Pen Connect Adapter fully.
Twist G Pen Connect Male Glass Adapter into bottom of the G Pen Connect Adapter fully.
Insert G Pen Connect into female joint of the water piece.
Remove Cover* of the G Pen Connect Tank. *After using max heat activation, please allow tank cover to cool for at least 2 minutes before touching.
Load Concentrates* onto bottom ceramic plate of the G Pen Connect Tank and Cover. *The G Pen Connect is intended for use with concentrate only.
Attach G Pen Connect Battery from circular connection point of battery onto matching circular plate on side of G Pen Connect Tank.
Press G Pen Connect Battery Button 5 times to power on/off.
To toggle between the 3 voltage output levels, press the button 3 times, Blue 3.1V / Green 3.6 V / Red 4.1 V
Press button 2 times to initiate automatic heat activation. Button will flash for 5 seconds indicating heat-up phase, then hold solid for an additional 10 seconds indicating maximum heat output. Press button to cancel heating at any time.
Press and hold button for manual heat activation for up to 15 seconds.
Press and hold side button of the G Pen Connect Adapter after heat activation for increased airflow and clearance of vapor from water piece.
The G Pen Connect produces a solid amount of tasty vapor on all 3 settings. With your favorite glass piece connected you can be sure your vapor will be of high quality and cool.
G Pen Connect Battery
The G Pen Connect Vaporizer has a 850mAh lithium-ion battery that lasts for approximately 15-20 sessions.
G Pen Connect Parts
From top to bottom, this is how G Pen Connect parts are assembled:
G Pen Connect Tank:
Magnetic tank cap, to conceal your concentrates.
Ceramic heating element, With patented reverse airflow technology.
G Pen Connect Housing:
Spring-loaded carb release and attachment to the battery.
G Pen Connect Battery:
Powerful 850 mah battery with 3 voltage settings.
G Pen Connect Glass Adapter:
Connects to any water piece with a glass-to-glass connection
How to clean the G Pen Connect?
To clean your G Pen Connect start by disassemble everything.
Fill up a cup with some ISO alcohol, the adapter connector, glass adapter, car button and spring can be submerged in alcohol.
For everything else, use a q-tip cotton swab dipped in alcohol and clean the inside of the tank, the atomizer anywhere else there might be residue.
After that, let all parts dry for 20 minutes or more before you assemble them back.
What can you vape with the G Pen Connect?
The G Pen Connect is a vaporizer for concentrate use only.
×
